Trimming presses are designed for the operation of trimming flash (burrs) of forgings in hot and cold condition and the manufacture of sheet material parts with operations of punching, relatively shallow drawing and other cold stamping works. Trimming press includes treatments such as bending, rotating, drawing, or stretching implemented by special dies or punching tools. Trimming, or pressings, are created by inserting a metal billet into a specialist machine often referred to as a trim metal press.

Trimming presses can be also regarded as blanking. The blanking press is intended for manufacturing various parts of sheets using cold stamping operations: blanking, punching, drawing, bending, etc.

The presses can be supplied complete with a hydropneumatic cushion by requests of customers.

The control system provides the possibility of enframing presses into automatic lines and complexes.

Rated force, kN2500400025004000
Slide stroke, mm, not less320400320400
Frequency of continuous slide strokes, min-1, not less than32253225
Frequency of single strokes, min-124192419
Slide stroke to its extreme lower position, at which the press develops the rated force, mm6868
Distance between the die plate and slide in its lower position at the upper adjustment position, mm390470840950
Adjustment value of the distance between the die plate and slide, mm140160140160
The die plate dimensions, mm800×8001000×1000830×8501000×1000
The slide dimensions from front to back, mm650800650800
Opening width in the racks, mm500600500630
Main drive motor power, kW26,537,026,540,0
Air consumption, m3/stroke0,0060,0170,0060,017
Press dimensions, mm
from left to right3000347034003470
front to back2970314027503140
Height above floor level, mm5180594053305940
Press weight without hydraulic cushion, kg23300326002390032900
pdf, ~3mb
pdf, ~3mb
Request a feedback

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.